When HOTUS and I moved back in December, we were confronted with a perplexing decorative dilemma: an imposingly bare 12-foot wall in our main room. The Beige Monster dwarfed our posters and photos, and buying a gigantic mirror/painting/whatever was prohibitively expensive. To make matters worse, we weren't allowed to paint the wall, or hang anything from it that would require an anchor or excessive reinforcement, making sconces and funky sculptural stuff out of the question. (Yep, #whitegirlproblems. Perhaps the #whitestgirlproblems.)
So, I started Googling solutions, and in short order, came upon this post at Bella Dia. Cute, inexpensive, and infinitely customizable, fabric wall panels seemed like a most excellent solution to our problem. Best of all, they could be completed in 90 minutes, and didn't seem to pose an enormous problem for someone who thinks "damask" is a country in Eastern Europe. (Meaning: me.)
These are my results:
Cute, right? Not bad for someone who finds macaroni necklaces too complicated. If you're interested, here's how the process went down, and how you might be able to create a similar set of panels. (Remember: This is a fool-proof project. I know, because I am that fool.)
First, you have to measure out your wall, and kind of imagine what size canvasses will fit well in the space. (You can also draw a graph, which is what HOTUS did.) While 18x22-inchers were perfect for our 12-foot wall, yours may differ.
Then, hit the stores. If your wall is like ours, you'll need:
- Four 18x24-inch wood-frame paint canvasses
- Four 22x28-inch bolts of your favorite fabrics (bigger is good, too)
- A staple gun and staples
- Measuring tape
- A pencil
- A hammer
- Four nails
- Brute strength
As for the staple gun, an old-school metal one worked best. Word of caution, though: After awhile, that thing is rough on your hands. Wear gloves if you have 'em.
Once everything is procured, it's time to start stapling. Lay a bolt of fabric pattern-side-down on a big surface, like a kitchen table. Then, lay a frame canvas-side down on top of it.
Pick a corner and fold the fabric up over the back of the frame, like you see in this picture. Then, staple it to the wood.
Do the same with the remaining three corners, taking care to keep your fabric straight in the front. If your cloth is striped or patterned, you want it to appear perfectly situated.
Once your corners are done, staple the fabric along each side of the back of the frame, so that it's pulled taut. Then, flip the whole thing over and gander at your handiwork. It should look something like this:
Continue with the remaining frames and fabrics until everything is completed.
Finally, using your pencil, measuring tape, hammer, and nails, position and hang your fabric panels on your wall. You may want 'em spaced evenly or spread out all fun-like. Really, it's up to you. To review, we did this:
And that, sweet readers, is the ballgame. Next stop: figuring out how to cover our fuse box.
Do you have a favorite decor solution? Do tell.
~~~
If you liked this, you'll really love:
.jpg)
Tidak ada komentar:
Posting Komentar